HP10 LightSpot Programmer
The HP10 Programmer is a simple-to-use programming tool for use with Ex-Or’s range of stand-alone lighting control products. Parameters, such as time delay and semi-automatic/fully automatic operation, are chosen via an array of 12 dil switches, the status of which is then programmed into the Ex-Or detector.
The HP10 can also be used to set the regulating light level in conjunction with a suitable lux meter on supported products via a simple UP/DOWN/STORE command.
Technical Data
- Transmission Method: Infrared
- Range: 15m approx
- Battery: 3Vdc CR2032 Lithium Button Cell
- Expected Battery Life: 3 years
- Storage Temperature: -25oC to + 70oC
- Operating Temperature: 0oC to 40oC IP RATING: 40
- Dimensions: 87mm (h) x 40mm (w) x 7mm (d)
- Weight: 200g approx
Product Compatibility
The following detectors are programmable via the HP10 although not all the programmable parameters are supported by all detectors. Options may also differ from those available via other programmers (e.g. an off-delay of 5-35 minutes can be chosen with the HP10 but of 1 minute – 96 hours using the HP2000). Please check individual Technical Data Sheets for details.
MS1100PF*, MS1224UF, MS1221Px, MS2001Dx, MSB100xD(ALI)T, MSM2000D, UC1221Px, MS1101Px*, MS1200PF, MS2001Ax, MS2021Px, MSB100xPT, UC1200PF,
MS1200D(AL)Ix, MS1201Px, MS2000DF, MS2421Px, MSM2000A, UC1201Px.
* setting photocell only
x denotes any other character/sin the part number