LightSpot LS QuickLink PIR Sensor
QuickLink is a unique intelligent solution which allows the easy creation of a simple, small network of up to four sensors. Each sensor can act independently or as an integral part of the network.
Features and benefits
QuickLink networks improve the intelligence of the system as the data on occupancy and light levels can be shared amongst the sensors.
Applications include corridor linking, ensuring you will always walk into an appropriately lit corridor.
QuickLink allows up to three additional sensors to be added with just two low voltage connections.
Tilting lenses enable the precise area of sensing to be adjusted as required. This means you can recover from an incorrect installation location or as the buildings use changes, you can adjust the detection footprint.
LightSpot HD QuickLink Master Sensors deliver industry leading low levels of quiescent power consumption, ensuring that the highest possible energy savings are achieved.
High definition lenses, performance optics and software are all optimised to provide class leading sensitivity and occupancy detection, ensuring that the lights are always on when required.
QuickAnalytics provides verification of energy savings using QuickSet Pro.
Technical Data
Technology: Yin/Yang PIR
Operating Voltage Master: 230V +/- 15% 50/60 Hz Recommended Circuit Protection 16A MCB
Operating Voltage BUS sensor:
- Min: 7.5V
- Nominal 15V
- Max: 17.5V
Current: QuickLink BUS Sensor: Max 12mA
Load Rating: Switching – 10A (Max Inrush Current 80A)
Load Rating: Dimming- 15 Ballasts
Power Consumption:
- Load On 500mW
- Load Off 150mW
Operating Temperature: 0° C to 45° C
Storage Temperature: -20° C to 80° C
Humidity Fascia: 20% to 80% non-condensing
Colour: White (RAL9010)
Material: Flame retardant PC/ABS
Products QuickLink Master
LS3043AR Analogue Dimming
Operating Voltage: 230v 50Hz
Capacity: 15 Ballasts Dimming
Tilting Lens: Yes
IP Rating: IP4x
LS3043DR Digital Dimming
Operating Voltage: 230v 50Hz
Capacity: 15 Ballasts Dimming
Tilting Lens: No
IP Rating: IP4x
Programming Tools And Controllers
Programmer:
QuickSet Pro – LightSpot HD Digital 2 Way Programming Tool
QuickSet – LightSpot HD Infrared Programming Tool
Controller:
QuickControl – LightSpot HD Infrared User Controller
Accessories