MLS3000 Connect Digital PIR Detectors Series
The CDW12U5 Programmable Connection Centres and CDH4U5/CDH8U5 Hard-Wired Intelligent Lighting Control Modules support a range of dedicated high-performance presence Sensors. Sensors contain a photocell to monitor total light levels, allowing the light output of dimmable luminaires to be adjusted to suit the natural light level available.
The range of MLS3000CDR series 360deg PIR sensors, all contain an infrared port that can be used both for local control from a hand-held device when in service and for initial commissioning of the CDW12U5/CDH4U5/CDH8U5 Intelligent LCM system.
Sensors connect to the LCM via RJ45 patch leads and all are SELV devices when properly installed and connected. Ready-made patch leads are available in lengths of 3m, 5m and 10m.
Two options are available MLS3000CDR – 360deg PIR Presence Sensor which is a fixed lens and the MLS3003CDR – 360deg PIR Presence Sensor which has a tilting Lenses to enable the precise area of sensing to be adjusted as required and extended in one direction (useful where the ideal mounting location is not available). The unique anti-tamper ‘twist-2- lock’ feature locks the detection area in position.
Technical Data
MLS3000CDR (F) – Flush (SM) – Surface
Operating Voltage: 12V DC, SELV if installed correctly
Range: 10m Diameter at a 2.5m mounting height with a 360deg Cone-shaped Yin/Yang detection pattern
Maximum Recommended Mounting Height: 3.5m
Photocell: Yes
Colour: White
IP Rating: 3X
Material: Flame retardant PC/ABS
MLS3003CDR (F) – Flush (SM) – Surface (Tilting Lens)
Operating Voltage: 12V DC, SELV if installed correctly
Range: 10m Diameter at a 2.5m mounting height with a 360deg Cone-shaped Yin/Yang detection pattern
Maximum Recommended Mounting Height: 3.5m
Photocell: Yes
Colour: White
IP Rating: 3X
Material: Flame retardant PC/ABS
Programming Tools And Controllers
Programmer:
Controller:
Accessories